+1(650)572-0122

My shopping cart My cart:
skip to the main content area of this page
Items
 

NuPOE-32EL


16 Module Slots Power-over-Ethernet Electronic Load Tester

Description

NuPOE-32EL is a test chassis with power load modules that acts as PD (powered device) of PoE (power over Ethernet). It can support up to 16 modules (for power that is less then 20 Watt) per chassis and they are able to be cascaded as a chain with more test modules for more DUT.

For PD device, there are varieties of power consumption requirement. NuPOE-32EL has different modules in one chassis for test from PSE with different power consumption. It support up to 20, 35, 45, 65 Watt for overload tests. Modules with higher Watt specification can do lower Watt test together with lower Watt module.

Xtramus has total solution to test the PoE DUT in both data flow and PoE simultaneously. Each module on NuPOE-32EL has even number of ports, 2 ports for one pair or 4 ports for 2 pairs. When PSE connect to PoE module such as port 1, the data flow bypasses the module to port 2 for the test from other tester such as NuStreams Chassis. Software utility of Xtramus can run both data flow and PoE tests sequentially or simultaneously.

Application Diagram

System features

  • Specialized equipment for production testing of PSE switch device.
  • Support multiple chassis cascade.
  • Load operation in constant power mode.
  • Alternative A and /or B wiring supported.
  • Support for all 5 PD classes (0~4) of power level.
  • Emulate PD Connect, Disconnect, Overload, Short Circuit and Dynamic Loading tests.
  • Great loading capacity for each port.
  • Support up to 20, 35, 45, 65 Watt for short-term overload tests.
  • LED on panel displays chassis ID and temperature.
  • IEEE802.3af and IEEE802.3at compliant.
  • Complete steps of PoE Verification Procedure

Applications

  • PSE switch manufacturing test

    Basic function tests for PSE switch

Return to All Items