+1(650)572-0122

My shopping cart My cart:
skip to the main content area of this page
Vacuum Capacitors

Guide bearing for VM variable vacuum capacitors

This option is used for the VM type capacitors. It is intended to relieve the lateral load to the capacitance adjustment screws possibly caused by central misalignment between the vacuum variable capacitor and the motor being installed.

Applicable models

SCV-510M,SCV-514M,SCV-155M,SCV-520M,SCV-1010,SCV-204,SCV-1010G,SCV-1014G,SCV-205G

(Remark) Screw positioning matches the P.C.D.60.

Applicable models

SCV-55,SCV-7.55,SCV-151,SCV-152,SCV-152.5,SCV-155G

(Remark) Screw positioning matches the P.C.D.45.



Water-cooled flanges for VH and VM variable vacuum capacitors

This option is used for the VH and VT type capacitors. It is intended to enhance the cooling capacity of the capacitors. There are water-cooling flange lineups applicable to both fixed and moving sides of the vacuum variable capacitors.

Applicable models for VH type

SCV-202.5H94, SCV-155H94,SCV-515H94,SCV-205H110,SCV-1010H110,SCV-520H110

Applicable models for VM type

SCV-510M,SCV-514M,SCV-155M-SCV-520M,SCV-1010,SCV-204,SCV-1010G,CV-1014G,SCV-205G

AWF-1 (fixed side)
AWM-1 (moving side)

SCV-55,SCV-7.55,SCV-151,SCV-152,SCV-152.5,SCV-155G

AWF-2 (fixed side)
AWM-2 (moving side)